Home > Buy Now > Other Networking Devices > Protocol Converter

Fiber Optical Active Components

Fiber Optical Network and Data Communication Systems

Video Fiber Optical Multiplexer Systems

Company Profile

Selling Leads

To Chinese Page

HonTeda Technology Co., Ltd.
[China]

Address:
A603, 6/F, JiaNanMeiDi Mansion, NO. 12038, Shennan Road, Nanshan District Shenzhen Guangdong 518052 China

Phone:
86-755-28008625

Contact name:
Victor Lo , Manager

HonTeda Technology Co., Ltd.

Fiber Optical Network and Data Communication Systems

	Protocol Converter

Click to enlarge image

Model Number

HTD-RS232-ETH,HTD-FE1-ETH,HTD-FE1-V.35

Protocol Converter (HTD-RS232-ETH)
1) Provides conversion between RS232 interface and Ethernet interface
2) Supports TCP/IP, UTP auto-negotiation
3) Data rate: 300-115,200BPS
4) Interface:
a) Ethernet port: RJ45 (10Base-T)
b) Data port: RS232
c) Flow control: software (X on/X off), hardware (RTS/CTSDTR/DSR)
5) Power supply: 9-20V DC
6) Operating temperature: 5 - 70°C
7) Remark: we can also provide HTD-RS485-ETH which support conversation between RS485 interface and Ethernet interface

Protocol Converter (HTD-FE1-V.35)
1) Provides conversion between ITU-T G.703 standard E1 interface and standard V.35 interface
2) 4 types of clock: master, slave, external and internal
3) 3 kinds of loopback: E1 self-looping, V.35 self-looping and V.35 being ordered by remote end to self-loop
4) Two rows of LED indicators: upper row indicate local status, lower row indicate remote status
5) The remote devices can be monitored by local devices
6) Supports SNMP network management with 4U rack mount chassis
7) E1 interface:
a) Transmission speed: 2.048Mbps±50ppm
b) Code: HDB3 code
c) Interface signal code: ITU-T G.703
d) Impedance: BNC 75Ω (non- balanced), RJ45 120Ω (balanced)
e) Interface characteristic: satisfies G.703 standard
f) Vibration characteristic: satisfies G.742 and G.823
8) V.35 port:
a) Transmission speed: 2.048Mbps±50ppm
b) Interface characteristic: satisfies V.35 standard
c) Connector: DB25 male/female joint for option
d) Interface type: DCE
e) Clock type: G.703 restoring clock, internal, and external clock
9) Power supply: 220V AC and/or -48V DC
10) Operation temperature: 32 - 140°F (0 - 60°C)
11) Storage temperature: -40 ~ +185°F (-40 ~ +85°C)
12) Humidity: 10 - 95% (non-condensing)
13) Dimensions: 220 x 145 x 40mm
14) Remark: we can also provide E1/V.35, E1/2V.35, E1/4V.35, FE1/2V.35 and FE1/4V.35

Protocol Converter (HTD-FE1-ETH)
1) Provides conversion between E1 interface and ETH interface
2) 2 types of clock: E1 master, E1 line clock
3) 3 kinds of loopback: E1 self-looping, ETH self-looping and ETH being ordered by remote end to self-loop
4) Two rows of LED indicators: upper row indicate local status, lower row indicate remote status
5) The remote devices can be monitored by local devices
6) Supporting SNMP network management with 4U rack mount chassis
7) E1 interface:
a) Interface standard: conforms to G.703 standard
b) Interface rate: 64kbps, N: 1 - 32
c) Vibration characteristic: satisfies G.742 and G.823 standard
d) Transmission capacity: 1 x E1
e) Clock type: internal-clock, route clock
f) Connector: BNC (75Ω), RJ45 (120Ω)
g) Interface impedance: 75Ω (non- balanced), 120Ω (balanced)
8) ETH interface:
a) Interface rate: 10/100Mbps
b) Duplex: half/full duplex self-adaptable
c) Interface characteristic: supports IEEE802.3, IEEE802.1Q (VLAN)
d) Physical interface: RJ45
e) Auto-MDIX: supports twisted cable and coaxial cable self-adaptable
f) MAC address table: can learn 4096 MAC addresses
9) Power supply: 220V AC and/or -48V DC
10) Operation temperature: 32 - 140°F (0 - 60°C)
11) Storage temperature: -40 ~ +185°F (-40 ~ +85°C)
12) Humidity: 10 - 95% (non-condensing)
13) Dimensions: 220 x 145 x 40mm
14) Remark: we can also provide E1/ETH, E1/4ETH, E1/8ETH, 4E1/ETH, 8E1/ETH, FE1/4ETH and FE1/8ETH